Automated Ultrasonic Corrosion Mapping (AUT)
Corrosion mapping by Ultrasonic testing produces true Top-View (C-scan) or Side view (B-Scan) of the ID surface profile for quick condition analysis of the item under inspection. C-Scan is presented in the thickness color mode easy to understand. Exact thickness of the minimum location area of corrosion or pit can be measured and overall data can be exported in .csv file format. Automated corrosion mapping (Rapid Motion Scanner), Scorpion B-Scan.
Rapid Motion Scanner (RMS)
Applications
- Ultrasonic System for Corrosion Mapping of ferrous structures.
- Such as storage tanks, pipelines, pressure vessels and other critical equipment supporting effective and safe operation.
- Detects Corrosion, Lamination, Inclusion, Hydrogen Blister & Dis-Bonding
- Applied from ID or OD side
Benefits
- Automated / Remote-access UT scanner.
- Can be used from dia 6.0” to flat plates.
- Up to 280 mm thickness & surface Temperature 200 ℃ (392 ℉)
- Maximum data resolution of 0.5 x 0.5 mm.
- Up to 50 m long x 1 m wide scan data acquisitions, in one location
- Transducer to ride over weld caps & lap joints up to 8 mm.
- Data can be presented in 2D & 3D View. Data export CSV file.
- No paint removal required
Scorpion B-Scan
The unique, dry-coupled ultrasonic wheel probe eliminates the need for couplant or a constant water supply. The twin-crystal ultrasonic transducer combined with a unique rolling probe face allows for a fast and easy setup
Applications
- Ultrasonic thickness measurements on ferrous material.
- On vertical surfaces such as oil storage tank shells, towers and stacks
- Minimum circumferentially and axially dia is 1.5m (59”) to Flat
- Minimum external diameter 3.0m (10”) axially and 3.0m (10”) circumferentially.
- The maximum surface temperature up to 40℃ (176℉).
Benefits
- Remote access crawler.
- Dry coupled rubber of the Wheel Probe.
- Near-surface resolution 2.5 mm (0.1 in)
- Optimum resolution 4mm, can be set between 1mm to 10mm
- Full recording of waveform up to 30 m distance
- Data export – Waveform to jpeg, Thickness readings with position to CSV.